Just imagine what you could do if you could tilt your router in the table. A roundover bit set at 45º makes a beaded edge. Straight bits work for chamfering. Slot cutters can groove panels for a spline. It’s much safer
to tilt the router than tilt your work! The Angle-Ease has 2.3” of fine height adjustment PLUS the length of your router motor (less 2” for the router block) of coarse adjustment. Some assembly required.

• Positive angle stops every 5º from 0 to 45º, plus one at 22-1/2º.
• Simple to use - only two knobs for tilt or height adjustment.
• Fits most popular router motors.
• Optional Height Adjuster available.
• Uses standard size 9-1/4” x 11-3/4” x 3/8” phenolic plate.
• Scale has one degree markings.
• Multiple profiles with just one bit.
• US Patent #6,742,558

Fits These Popular Router Motors (Call For Adapters or Shims):
• Porter Cable 7518 (Direct Fit)
• Porter Cable 690 & 892 with optional 1425R1 Adapter.
• Milwaukee 5625 with 1430S Shim.
• DeWalt 616/618 with optional 1425R1 Adapter.
• Bosch 1617/18 with optional 1425R1 Adapter.
• Makita RF1101 with optional 1425R2 Adapter.
• Hitachi M12VC with optional 1425R3 Adapter.